Your cart is empty

New HP Pavilion 15-R 15-R000 Series LCD Video Cable - 749646-001 DC02001VU00

$17.68

Qty Discounts Off Price
Qty. Range Unit Price Disc.
1 $17.68
2-4 $15.03 15%
5-19 $13.26 25%
20+ $11.49 35%
Add to Cart:



Ask a question



Description of HP Pavilion 15-R Series LCD Cable:
Condition: New
Warranty:3 Months
Package Content: 1 x LCD Cable
Shipping: Free worldwide shipping!

Replacement for:
749646-001 DC02001VU00

Fit models:
15-R000 Series 15-R000EL 15-R000NA
15-R001LA 15-R003NG 15-R004XX
15-R005LA 15-R006TU 15-R007TU
15-R007TX 15-R008NA 15-R008TU
15-R008TX 15-R011DX 15-R011DX
15-R012NA 15-R013CA 15-R015DX
15-R017DX 15-R018DX 15-R021NG
15-R026NA 15-R029WM 15-R030NA
15-R036TU 15-R061NF 15-R100 Series


Removal HP Pavilion 15-R Series LCD Cable

For the convenience, here we provide a universal instruction for your reference, it is simple and some steps may be different to the disassembly of your laptop. If you need a detailed manual, please contact us, we will email you if we have.

1. Make sure that your HP Pavilion 15-R Series is powered completely off: Unplug the power cord and take the battery out. .

2. Turn over you laptop and remove all the screws you can see. Then remove all the covers such as hard drive cover, memory card cover. Disconnect the antenna cables from the Mini Card, if applicable.

3. Open the display all the way (180 degrees) so that it rests on your work surface. Insert a scribe into the indent to lift the keyboard cover on the right side. Ease the keyboard cover up, moving from right to left, and remove it.

4. Remove the screws (if has) that hold the keyboard in place and push back some plastic tabs. Lift the keyboard and unplug the keyboard cable from the motherboard. Remove the HP Pavilion 15-R Series keyboard.

5. Remove the screws (may not have) that hold the palm rest in place. Carefully pry loose any plastic snaps on the sides, then lift palm rest up and uplug all the cables. Remove the palm reset.

6. Remove the top cover (if has) of the laptop base, you may need to remove some screws and cables firstly.

7. Disconnect the display cable from the system board, and then disengage the display cable from the cable channel. Carefully unthread the Mini Card antenna cables through the laptop base and ensure that the plastic protectors-if-present-remain on the individual cables. Disconnect all other cables from the mother board to display assembly.

8. Remove the screws that connect the display to the computer base. Then remove the HP Pavilion 15-R Series display assembly.

9. Remove the screw covers on the display bezel and remove the screws. Remove the display bezel.

10. Loosen the captive ground screw that attaches the display panel ground wire to the display back cover.

11. Remove all the screws on each side of the display panel. Lift the display panel out of the display back cover. Press in both sides of the top flex cable connector, and pull the top flex cable connector away from the display connector.
 
12. Use the pull tab to disconnect the bottom flex cable connector from the inverter connector. Now, you can remove the HP Pavilion 15-R Series LCD video cable


Installing HP Pavilion 15-R Series LCD video cable Replacement

Reverse the procedure to install the HP Pavilion 15-R Series LCD video cable replacement.