Your cart is empty

HP TouchSmart Envy M7-j M7-j020dx LCD Hinges - 6055B0025901 6055B0025902

$39.86

Qty Discounts Off Price
Qty. Range Unit Price Disc.
1 $39.86
2-4 $33.88 15%
5-19 $29.90 25%
20+ $25.91 35%
Add to Cart:



Ask a question



Product description of HP Envy M7-j M7-j020dx Series LCD Hinges
Type: For 17.3" Display
Unit: One Pair (left & right hinges)
Warranty: 6 months
Condition: USED
Notice: These series laptop have two different hinges. Please check the product image before purchase, you will get what you see.
Shipping: Free worldwide shipping!


Replacement for:
6055B0025701 6055B0025702 6055B0025801
6055B0025802

Fit Models:
Envy M7-J series Envy M7-J000 series/td> Envy M7-j020dx

 


Removal HP Envy M7-j M7-j020dx Series LCD Hinges

For the convenience, here we provide a universal instruction for your reference, it is simple and some steps may be different to the disassembly of your laptop. If you need a detailed manual, please contact us, we will email you if we have.

1. Make sure that your HP Envy M7-j M7-j020dx Series is powered completely off: Unplug the power cord and take the battery out. .

2. Turn over you laptop and remove all the screws you can see. Then remove all the covers such as hard drive cover, memory card cover.

3. Disconnect the antenna cables from the Mini Card, if applicable.

4. Open the display all the way (180 degrees) so that it rests on your work surface. Insert a scribe into the indent to lift the keyboard cover on the right side. Ease the keyboard cover up, moving from right to left, and remove it.

5. Remove the screws (if has) that hold the keyboard in place and push back some plastic tabs. Lift the keyboard and unplug the keyboard cable from the motherboard. Remove the HP Envy M7-j M7-j020dx Series keyboard.

6. Remove the screws (may not have) that hold the palm rest in place. Carefully pry loose any plastic snaps on the sides, then lift palm rest up and uplug all the cables. Remove the palm reset.

7. Remove the top cover (if has) of the laptop base, you may need to remove some screws and cables firstly.

8. Disconnect the display cable from the system board, and then disengage the display cable from the cable channel.

9. Carefully unthread the Mini Card antenna cables through the HP Envy M7-j M7-j020dx Series base and ensure that the plastic protectors-if-present-remain on the individual cables.
 
10. Disconnect all other cables from the mother board to HP Envy M7-j M7-j020dx Series display assembly.

11. Remove the screws that connect the display to the computer base. Then remove the display assembly.

12. Remove the screw covers on the display bezel and remove the screws. Remove the display bezel.

13. Loosen the captive ground screw that attaches the display panel ground wire to the display back cover.

14. Remove all the screws on each side of the display panel.

15. Now, you can remove the HP Envy M7-j M7-j020dx Series LCD hinges.


Installing HP Envy M7-j M7-j020dx Series LCD Hinges Replacement

Reverse the procedure to install the HP Envy M7-j M7-j020dx Series LCD hinges replacement.