Your cart is empty

HP 15-G000 15-G100 15-R000 Series CPU Fan - 753894-001

$19.56

Qty Discounts Off Price
Qty. Range Unit Price Disc.
1 $19.56
2-4 $16.63 15%
5-19 $14.67 25%
20+ $12.71 35%
Add to Cart:



Ask a question



Product Description of HP 15-G000 15-G100 15-R000 Series CPU Cooling Fan:

100% TESTED 100% WORK AND PASS THE NOISE TEST !
Condition: Brand new
Power: DC5V 0.4A
Info: 3-wire 3-pin connector 
Warranty: 3 Months
Package Content: 1 x CPU Cooling Fan
Shipping: Free worldwide shipping!

Replacement For:
753894-001 AB07005HX08K300 DC28000C8F0
DC28000E3F0 DFS470805Cl0T DFS470805Cl0T FFG7
EF50050S1-C280-S9A EF60070S1-C050-G99

Fit Models:
15-G000 Series 15-G000NA 15-G005NA
15-G007NA 15-G010DX 15-G012DX
15-G013CL 15-G019WM 15-G020CA
15-G020NR 15-G029WM 15-G060NR
15-G063NR 15-G070NR 15-G073NR
15-G074NR 15-G075NR 15-G100 Series
15-R000 Series 15-R000EL 15-R000NA
15-R001LA 15-R003NG 15-R004XX
15-R005LA 15-R006TU 15-R007TU
15-R007TX 15-R008NA 15-R008TU
15-R008TX 15-R011DX 15-R011DX
15-R012NA 15-R013CA 15-R015DX
15-R017DX 15-R018DX 15-R021NG
15-R026NA 15-R029WM 15-R030NA
15-R036TU 15-R061NF 15-R100 Series

Removal HP 15-G000 15-G100 15-R000 Series CPU Cooling Fan

For the convenience, here we provide a universal instruction for your reference, it is simple and some steps may be different to the disassembly of your laptop. If you need a detailed manual, please contact us, we will email you if we have.

NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on the back of the computer).

1. Make sure that your HP 15-G000 15-G100 15-R000 Series is powered completely off: Unplug the power cord and take the battery out. .

2. Turn over you laptop and remove all the screws you can see. Then remove all the covers such as hard drive cover, memory card cover.
If you can access the fan now, just unplug the fan cable and remove the screws securing the HP 15-G000 15-G100 15-R000 Series fan.
If not, remove the DVD drive and the hard drive. Because you have removed all the screws on the back of the laptop, you can pull out the DVD drive directly now.

3. Open the display all the way (180 degrees) so that it rests on your work surface. Insert a scribe into the indent to lift the keyboard cover on the right side. Ease the keyboard cover up, moving from right to left, and remove it.

4. Remove the screws (if has) that hold the keyboard in place and push back some plastic tabs. Lift the keyboard and unplug the keyboard cable from the motherboard. Remove the HP 15-G000 15-G100 15-R000 Series keyboard.

5. Remove the screws (may not have) that hold the palm rest in place. Carefully pry loose any plastic snaps on the sides, then lift palm rest up and uplug all the cables. Remove the palm reset.

6. Remove the top cover of the laptop base, you may need to remove some screws and cables firstly. Usually, you can access the fan now. If not, please continue.

7. Remove the screws securing the motherboard and unplug all the cables connected with other parts. Now, take out the motherboard, the fan should be on the back of the motherboard or on the bottom of the laptop base.

8. Remove the screws from the HP 15-G000 15-G100 15-R000 Series fan, and then disconnect the fan cables. Sometimes you need to remove the heatsink firstly, if so, remove screws that hold the heat sink in place, then remove the entire cooling module from the laptop.


Installing HP 15-G000 15-G100 15-R000 Series CPU Cooling Fan Replacement

1. Clean any thermal compound residue from the bottom of the heat sink and the CPU.

2. Apply a thin and even layer of thermal compound on the CPU, then reverse the disassembly procedure to install your new fan and assemble the HP 15-G000 15-G100 15-R000 Series.

3. Turn on your HP 15-G000 15-G100 15-R000 Series. After you use it for a few minutes, you should hear the new cooling fan running and feel warm air blowing from the vent on the side of the laptop.