Your cart is empty

Genuine New Sony Vaio SVE14113EBB AC DC Power Jack With Cable PJ545


Add to Cart:

Ask a question

Description of Sony Vaio SVE14113EBB AC DC Power Jack With Cable:
Condition: New
Warranty:3 Months
Package Content: One DC Power Jack with Cable Harness
Shipping: Free worldwide shipping!

Replacement for:

Fit models:
Sony SVE14113EBB Sony Vaio E14113EBB

Removal Sony SVE14113EBB DC JACK Cable

For the convenience, here we provide a universal instruction for your reference, it is simple and some steps may be different to the disassembly of your laptop. If you need a detailed manual, please contact us, we will email you if we have.

1. Make sure that your Sony SVE14113EBB is powered completely off: Unplug the power cord and take the battery out.

2. Turn over you laptop and remove all the screws you can see. Then remove all the covers such as hard drive cover, memory card cover. Disconnect the antenna cables from the Mini Card, if applicable.

3. Open the display all the way (180 degrees) so that it rests on your work surface. Insert a scribe into the indent to lift the keyboard cover on the right side. Ease the keyboard cover up, moving from right to left, and remove it.

4. Remove the screws (if has) that hold the keyboard in place and push back some plastic tabs. Lift the keyboard and unplug the keyboard cable from the motherboard. Remove the Sony SVE14113EBB keyboard.

5. Remove the screws (may not have) that hold the palm rest in place. Carefully pry loose any plastic snaps on the sides, then lift palm rest up and uplug all the cables. Remove the palm reset.

6. Remove the top cover (if has) of the laptop base, you may need to remove some screws and cables firstly.

7. Now, you could access the DC Jack, uplug the DC Jack and remove it.

Installing Sony SVE14113EBB DC Jack Cable Replacement

Reverse the procedure to install the Sony SVE14113EBB DC Jack Cable replacement.